Energy-carbon emission nexus in a residential building using BIM under different climate conditions: an application of multi-objective optimization

No Thumbnail Available

Date

2023

Journal Title

Journal ISSN

Volume Title

Publisher

Frontiers Media SA

Research Projects

Organizational Units

Journal Issue

Abstract

This study was carried out to investigate the impact of building insulation, a method of reducing energy consumption, on the amount of energy consumed in a building, as well as its impact on cooling and heating loads and carbon emission. A residential structure was designed in Revit, and DesignBuilder determined the cooling and heating loads, as well as the energy consumption. Under three distinct climate conditions, the impact of the environment on the energy-carbon emission nexus of residential buildings was assessed. The cold mountain climate of Koick, Slovakia; the arid desert climate of Ha’il, Saudi Arabia; and the tropical monsoon climate of Borneo, Indonesia were chosen. During the design stage, the Particle Swarm Optimization (PSO) method was used to minimize the energy consumption cost (ECC) and CO2 emissions. Over the course of 24 h, the cooling and heating loads decreased by 2.51 kW and 1.9 kW, respectively. When the two modes in Ha’il were combined, the heating load was reduced to 850 kWh and the cooling load was reduced to 650 kWh, according to the results. In Borneo, the heating load was reduced by 200 kWh, while in Koick, it was reduced by 2,000 kWh. The cooling load was reduced by 550 and 50 kWh in Borneo and Koick, respectively. This system appears to perform better in arid and hot climates in terms of both heating and cooling loads. However, energy losses in the arid and hot climate (Ha’il) are greater than in other climates. This could be due to temperature and humidity differences between the inside and outside. According to the findings of the PSO evolutionary algorithm optimization, the building can be constructed to reduce ECC by 19% by taking into account input characteristics such as Wind-to-Wall Ratio (WWR), wall, glazes, and weather conditions. This research provides useful insights into the practical application of optimization methods for reducing CO2 emissions, paving the way for more sustainable and eco-conscious architectural practices. Copyright © 2023 Alhamami, Dodo, Naibi, Alviz-Meza and Mokhtarname.

Description

Keywords

building information modelling, cooling and heating loads, energy consumption cost, energy-carbon emission nexus, optimization

Turkish CoHE Thesis Center URL

Citation

2

WoS Q

Q3

Scopus Q

Q3

Source

Frontiers in Energy Research

Volume

11

Issue

Start Page

End Page