Browsing by Author "Esmaeili,S."

Now showing 1 - 2 of 2

Citation Count: 0
The effect of initial pressure and temperature on the flow in a three-dimensional cavity filled with paraffin/Cu nanostructure with a wavy lower wall and a movable upper wall using molecular dynamics simulation
(Elsevier B.V., 2024) Salahshour, Soheıl; Ali,A.B.M.; Ali,A.H.; Salahshour,S.; Esmaeili,S.
Phase change materials (PCMs) are very suitable for the storage of thermal energy. Heat transfer plays a crucial role in many important industrial processes in today's industrial environment. Thus, it is crucial to examine and comprehend this occurrence properly. This work uses molecular dynamic simulation to examine the effect of initial pressure (IP) and temperature (Temp) on the thermal efficiency of phase change materials inside a three-dimensional cavity. The hollow contains paraffin/Cu nanoparticles and has a bottom wall with a wavy shape and an upper wall that can be adjusted. The results of the equilibration stage indicated that the kinetic and potential energies converge to 2100 eV and -95472.50 eV after 10 ns. Next, the results show that increasing IP resulted in the reduction of maximum velocity and Temp, which decreased from 0.0099 Å/ps and 898 K to 0.0090 Å/ps and 888 K. Furthermore, the results show that by increasing IP, the heat flux and thermal conductivity decrease from 9.95 W/m2 and 1.45 W/m.K to 8.89 W/m2 and 1.26 W/m.K. Conversely, as the initial Temp rose from 300 to 350 K, so did the velocity (0.0125 Å/ps) and Temp (990 K). Furthermore, the thermal conductivity and heat flux increased to 1.69 W/mK and 11.25 W/m2, respectively. This study reveals how molecular dynamics simulations provide insights into the effects of initial pressure and temperature on the flow and thermal behavior of a paraffin/copper nanostructure. The findings improve understanding of nanofluid and phase change material behavior, aiding the design of more efficient PCM-based systems for thermal energy storage and heat transfer applications. In general, the results of this research illuminate the complex relationship among IP, Temp, and thermal properties of phase change materials. This knowledge is of great significance as it can guide the formulation of novel approaches to enhance the thermal efficiency of these materials in practical applications. © 2024 The Author(s)
Citation Count: 0
Influences of stenosis and transplantation on behavior of blood flow in the host and grafted vessels using computational fluid dynamics
(Elsevier B.V., 2024) Gataa,I.S.; Salahshour, Soheıl; Mozoun,M.A.; jumaah,M.D.; Salahshour,S.; Yazdekhasti,A.; Esmaeili,S.
In this research, the changes of wall shear stress (WSS) of flow blood affected by stenosis and grafted vessels are studied. For the simulation of non-Newtonian fluid, blood in this paper, the Carreau fluid model is used. The severity of the stenosis is considered to reduce the internal cross-sectional area of the host vessel by 30 %. In this paper, simulations are performed on the human body in sports, which are classified into anemia (LHD), normal (NHD) and high blood pressure (HHD). Results are presented in three sections including after stenosis region, transplantation section, and after transplantation region by calculating wall shear stress (WSS). It is reported that wall shear stress is increased after stenosis location due to immediate variation in the cross-section area when blood flows. To explain, Stenosis reduces the cross-section area of the vessel which causes flow contraction. Consequently, this phenomenon increases flow velocity in the central region of blood flow whereas, after passing from stenosis, blood flow is exposed to an abrupt expansion which causes flow back from the central region to wall vicinity in lateral regions of the vessel. Maximum amounts of wall shear stress are achieved at 280 Pa, 350 Pa, and 550 Pa for anemia, normal, and hypertensive individuals in order. However, the consequence of the mentioned phenomenon in hypertensive individuals is more severe than that of anemic ones. Therefore, the geometry of veins is very important in medical surgeries to prevent vessel failure, especially in stressful points of transplantation. © 2024 The Author(s)