Disturbance Observer Based Active Independent Front Steering Control for Improving Vehicle Yaw Stability and Tire Utilization

dc.authorscopusid57191057966
dc.authorscopusid7006145838
dc.authorscopusid34869466300
dc.contributor.authorGozu, Murat
dc.contributor.authorOzkan, Basar
dc.contributor.authorEmirler, Mumin Tolga
dc.date.accessioned2024-05-25T11:25:33Z
dc.date.available2024-05-25T11:25:33Z
dc.date.issued2022
dc.departmentOkan Universityen_US
dc.department-temp[Gozu, Murat] Istanbul Okan Univ, Dept Mechatron Engn, TR-34959 Istanbul, Turkey; [Ozkan, Basar] Istanbul Okan Univ, Dept Mech Engn, TR-34959 Istanbul, Turkey; [Emirler, Mumin Tolga] Yildiz Tech Univ, Dept Aviat Elect, TR-34220 Istanbul, Turkeyen_US
dc.description.abstractIn the currently used steering systems, the front tires are steered dependently during turning maneuvers. During these maneuvers, the weight transfer causes the inner tire to have less vertical force compared to the outer tire. Therefore, it generates less lateral tire force and can be saturated easily in some extreme conditions. On the other hand, the outer tire can provide more lateral force due to the higher vertical force, but its potential may not be utilized because the steering of the inner and outer tires is dependent. Thus, an independent steering capability can provide potential benefits by eliminating the saturation of the inner tire and getting more lateral force from the outer tire. Therefore, an active independent front steering system is proposed by combining a yaw-rate PI controller with disturbance observers on tire forces to improve the yaw stability at the acceptable limits. The coefficients of the PI controller are calculated analytically. The cut-off frequency in the disturbance observer is determined by the robust stability analysis considering the variance in the vehicle dynamic parameters. Finally, by taking into account the tire utilization coefficient (TUC), the performance of the proposed system is compared to conventional active steering systems in CarSim simulation environment.en_US
dc.identifier.citation4
dc.identifier.doi10.1007/s12239-022-0075-1
dc.identifier.endpage854en_US
dc.identifier.issn1229-9138
dc.identifier.issn1976-3832
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85131216073
dc.identifier.scopusqualityQ2
dc.identifier.startpage841en_US
dc.identifier.urihttps://doi.org/10.1007/s12239-022-0075-1
dc.identifier.urihttps://hdl.handle.net/20.500.14517/916
dc.identifier.volume23en_US
dc.identifier.wosWOS:000805780100023
dc.identifier.wosqualityQ4
dc.language.isoen
dc.publisherKorean Soc Automotive Engineers-ksaeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectControl systemen_US
dc.subjectVehicle yaw stabilityen_US
dc.subjectActive steering controlen_US
dc.subjectIndependent steeringen_US
dc.subjectDisturbance observeren_US
dc.titleDisturbance Observer Based Active Independent Front Steering Control for Improving Vehicle Yaw Stability and Tire Utilizationen_US
dc.typeArticleen_US
dspace.entity.typePublication

Files