WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/20.500.14517/18

Browse

Now showing 1 - 20 of 1370

Citation Count: 0
3-D NUMERICAL MODELLING OF GROUND VIBRATION WAVES INDUCED BY BLASTING AT A QUARY
(int Scientific Conference Sgem, 2010) Kahriman, Ali; Kahriman, Ali; Makine / Machinery
Ground vibrations arising from excavation with blasting is one of the environmental problems in mining industry. The prediction of ground vibrations and the realization of controlled blasting based on this prediction have a great importance in order to minimize the environmental effects of blasting. The purpose of this study is to analyze the ground vibrations induced by blasting at Akyol Quarry which selected as a test site after the determination of the geomechanical properties of the rock mass with a computer software (AUTODYN 3D) that is able to model three dimensionally. During the field study, samples were taken from the different regions of the quarry. On these samples, geomechanical properties of the intact rock samples were determined. Then, geomechanical properties of the rock mass were estimated. In the numerical modeling stage, four main numerical models were prepared in the AUTODYN software by using the data obtained from the field and laboratory studies. The data obtained from these model runs was compared to the data obtained in the field measurements. As a result of this comparison, the model that would be used for future studies was selected.
Citation Count: 0
A 3-year-old child with multi-drug resistant epilepsy responding to pharmacological and nonpharmacological treatments
(Taylor & Francis Ltd, 2023) Coskun, Yesim; Yildirim, Canan
Introduction: Despite the development of new antiseizure drugs (ASDs), around one third of epilepsy patients become refractory to treatment or experience adverse events due to ASDs. Therefore, discovery of new ASDs and new therapy options are crucial to improve the quality of life. Herein, we report a 3-year-old child with multi-drug resistant epilepsy caused by perinatal asphyxia whose seizures were reduced by 90% after the introduction of ketogenic diet, vagal nerve stimulation (VNS) AspireSR (SR-seizure response) and oral cannabidiol.Case presentation: A 9-month-old female infant had a history of multidrug resistant epilepsy due to perinatal asphyxia. At admission, she was experiencing up to 20-25 seizures per day lasting for 2-3 minutes. In addition to antiseizure drugs (ASDs), she was put on ketogenic diet (KD), vagal nerve stimulation (VNS) aspire seizure response (AspireSR) was inserted and oral cannabidiol (CBD) was started sequentially. Using pharmacological and nonph armacological therapies, her seizures have been reduced by 90%.Conclusion: The concurrent use of pharmacological and nonpharmacological therapies may be beneficial to improve seizures in infants with multi- Furthermore, our patient is the youngest child inserted VNS AspireSR in Turkey.
Citation Count: 0
3D and 4D printing of MXene-based composites: from fundamentals to emerging applications
(Royal Soc Chemistry, 2024) Khosravı, Arezoo; Zarepour, Atefeh; Khosravi, Arezoo; Iravani, Siavash; Zarrabi, Ali; Genetik ve Biyomühendislik / Genetic and Bio-Engineering
The advent of three-dimensional (3D) and four-dimensional (4D) printing technologies has significantly improved the fabrication of advanced materials, with MXene-based composites emerging as a particularly promising class due to their exceptional electrical, mechanical, and chemical properties. This review explores the fundamentals of MXenes and their composites, examining their unique characteristics and the underlying principles of their synthesis and processing. We highlight the transformative potential of 3D and 4D printing techniques in tailoring MXene-based materials for a wide array of applications. In the field of tissue regeneration, MXene composites offer enhanced biocompatibility and mechanical strength, making them ideal for scaffolds and implants. For drug delivery, the high surface area and tunable surface chemistry of MXenes enable precise control over drug release profiles. In energy storage, MXene-based electrodes exhibit superior conductivity and capacity, paving the way for next-generation batteries and supercapacitors. Additionally, the sensitivity and selectivity of MXene composites make them excellent candidates for various (bio)sensing applications, from environmental monitoring to biomedical diagnostics. By integrating the dynamic capabilities of 4D printing, which introduces time-dependent shape transformations, MXene-based composites can further adapt to complex and evolving functional requirements. This review provides a comprehensive overview of the current state of research, identifies key challenges, and discusses future directions for the development and application of 3D and 4D printed MXene-based composites. Through this exploration, we aim to underscore the significant impact of these advanced materials and technologies on diverse scientific and industrial fields. This review highlights the developments in the 3D/4D printing of MXene-based composites, focusing on their application in tissue regeneration, drug delivery, sensing, and energy storage.
Citation Count: 1
3D FEA of Hollow and Solid Design Zirconia Dental Dowels
(Wiley, 2016) Kayahan, Mehmet Baybora; Ozkurt-Kayahan, Zeynep; Yay, Kubilay; Kazazoglu, Ender
PurposeThe aim of this study was to evaluate the stress distribution of hollow and solid design zirconia dowels. Materials and MethodsFinite element analysis (FEA) was used to investigate the influence of different dowel designs on the stress distribution of zirconia dowels. The coronal diameter of the dowel was 2.2 mm, the apical diameter was 1.8 mm, and the length was 15 mm. The diameter of the hollow space was 1.2 mm. Occlusal forces (both parallel and oblique) of 100 N were applied from the wider edge of the dowels simulating loads acting on the incisor during clenching and incising. The results were expressed in terms of von Mises criteria. ResultsFEA revealed differences in stress distribution. During parallel load, the maximum tensile stress of the hollow design (89.40 MPa) was greater than the solid design (43.30 MPa). During oblique load, the maximum tensile stress of the hollow design (1437.90 MPa) was greater than the solid design (917.96 MPa). The maximum deformation was observed in the coronal part of the dowel in both designs under the two load directions. ConclusionsFEA results showed that the hollow design zirconia dowels presented higher tensile stress.
Citation Count: 3
A 3D finite element analysis of stress distribution on different thicknesses of mineral trioxide aggregate applied on various sizes of pulp perforation
(Springer Heidelberg, 2020) Beşiroğlu Turgut, Ekin; Turgut, B.; Akin, H.; Kayahan, M. B.; Kazazoglu, E.; Periodontoloji / Periodontology
Objectives The aim of this study was to evaluate the stress distribution on different thicknesses of mineral trioxide aggregate (MTA) placed on various widths of pulp perforations during the condensation of the composite resin material. Materials and methods The mandibular molar tooth was modeled by COSMOSWorks program (SolidWorks, Waltham, MA). Three finite elemental analysis models representing 3 different dimensions of pulp perforations, 1, 2, and 3 mm in diameter, were created. The perforation area was assumed as filled with MTA with different thicknesses, 1, 2, and 3 mm for each pulp perforation width, creating a total of 9 different models. Then, a composite resin material was layered on MTA for each model. A 66.7 N load was applied and an engineering simulation program (ANSYS, Canonsburg, US) was used for the analysis. Results were presented considering von Mises stress criteria. Results As MTA thickness increased, the stress values recorded within the area between pulp and MTA decreased. Strain was decreased when the thickness of MTA increased. Conclusions Stresses at MTA-pulp interface and strain on MTA decreased with the increase in MTA thickness.
Citation Count: 5
4/3 problem, Poynting theorem, and electromagnetic energy-momentum tensor
(Canadian Science Publishing, 2015) Yarman, Nuh Tolga; Missevitch, Oleg V.; Yarman, Tolga; Enerji Sistemleri Mühendisliği / Energy Systems Engineering
We show that the familiar 4/3 problem originates from the incorrect determination of the momentum of the electromagnetic field generated by an isolated charged particle, which results from an incorrect application of the Poynting theorem to the field. To demonstrate this, we consider a macroscopic problem: splitting a charged oil droplet into two identical smaller droplets in the rest frame K of the original droplet, and in another inertial frame K' moving with respect to K with some constant velocity, and arrive at a physically senseless solution in the framework of the standard approach. To solve this problem in a correct way, we suggest a modified Poynting theorem for an isolated charge and recalculate the momentum of the electromagnetic field of this charge, which yields the usual relativistic relationship between the field energy and momentum. Our approach is not at odds with the idea about "Poincare stresses"; however, in contrast to the standard method, it provides a usual relationship between the "Poincare stress-energy" and the associated momentum stress component. Finally, the continuity equation in four-dimensional form for the case of isolated moving charge is also proposed, which completely resolves the 4/3 problem.
Citation Count: 0
5-Year clinical performance of ceramic onlay and overlay restorations luted with light-cured composite resin
(Elsevier Sci Ltd, 2024) Yurdaguven, Gulsah Yenier; Çiftçioğlu, Elif; Kazokoglu, Fatma Sehnaz; Kayahan, Mehmet Baybora; Endodonti / Endodontics
Objectives: This prospective clinical trial evaluated the clinical performance of ceramic partial coverage indirect adhesive restorations (PCIARs) in posterior teeth luted with a light-cured composite resin. Methods: From April 2016 to January 2017, a total of 60 patients (27 males, 33 females; mean age: 42.2 +/- 10.86 years old) received 83 glass-ceramic PCIARs (26 onlay, 57 overlay) made of IPS Emax CAD (Ivoclar Vivadent). All restorations were luted with a light-cured composite resin (Filtek Z250, 3 M ESPE) by two operators. Two independent calibrated examiners blinded to the operators performing the treatment evaluated the restorations at baseline, 1-year, and 5-year following FDI World Dental Federation criteria including esthetic, functional, and biological properties. Data were analyzed with the Friedman test and the Wilcoxon sign test (p p < 0.05). Results: None of the restorations failed due to fracture or retention loss. One restoration was clinically unsatisfactory because of secondary caries. Marginal staining (p:0.000), marginal adaptation (p:0.018) showed significant differences between 1-year and 5-year recall. Conclusions: The PCIARs demonstrated excellent clinical performance at 1-year period. The degradation parameters appeared as minor staining and minor irregularities after 5-year, without any affect on the clinical performance.
Citation Count: 1
ABSTRACT CAPACITY OF REGIONS AND COMPACT EMBEDDING WITH APPLICATIONS
(Springer, 2011) Shakhmurov, Veli
The weighted Sobolev-Lions type spaces W-p,gamma(l) (Omega; E) boolean AND L-p,L-gamma (Omega; E-0) are studied, where E-0, E are two Banach spaces and E-0 is continuously and densely embedded on E. A new concept of capacity of region Omega is an element of R-n in Wp,gamma(l)(Omega; E-0, E) is introduced. Several conditions in terms of capacity of region Omega and interpolations of E-0 and E are found such that ensure the continuity and compactness of embedding operators. In, particular, the most regular class of interpolation spaces E-alpha between E-0 and E, depending of alpha and l, are found such that mixed differential operators D-alpha are bounded and compact from W-p,gamma(l)(Omega; E-0, E) to E-alpha-valued L-p,L-gamma spaces. In applications, the maximal regularity for differential-operator equations with parameters are studied.
Citation Count: 4
Abstract Differential Equations with VMO Coefficients in Half Space and Applications
(Springer Basel Ag, 2016) Shakhmurov, Veli
In this paper, L (p) -separability properties of boundary value problems for elliptic and parabolic differential-operator equations with VMO coefficients are studied in half plane. In application, the maximal regularity properties of the anisotropic elliptic equation and system of equations with VMO coefficients are derived.
Citation Count: 4
Abstract Elliptic Equations with Integral Boundary Conditons
(Shanghai Scientific Technology Literature Publishing House, 2016) Shakhmurov, Veli
This paper focuses on nonlocal integral boundary value problems for elliptic differential-operator equations. Here given conditions guarantee that maximal regularity and Fredholmness in L-p spaces. These results are applied to the Cauchy problem for abstract parabolic equations, its infinite systems and boundary value problems for anisotropic partial differential equations in mixed L-p norm.
Citation Count: 11
Abstract parabolic problems with parameter and application
(Elsevier Science inc, 2013) Shakhmurov, Veli B.; Sahmurova, Aida
In this work, the uniform well-posedenes of singular perturbation problems for parameter dependent parabolic differential-opera tor equations is established. These problems occur in phytoremediation modelling. (C) 2013 Elsevier Inc. All rights reserved.
Citation Count: 0
Academic Vocabulary in Learner Writing: From Extraction to Analysis
(Sage Publications Ltd, 2011) Yigitoglu, Nur
[No Abstract Available]
Citation Count: 1
Academic Writing in a Global Context: The Politics and Practices of Publishing in English
(Tesol, 2012) Yigitoglu, Nur
[No Abstract Available]
Citation Count: 0
Academic Writing: At the Interface of Corpus and Discourse
(Pergamon-elsevier Science Ltd, 2012) Yigitoglu, Nur
[No Abstract Available]
Citation Count: 7
Accelerating the reaction process of sodium carbonate-activated slag mixtures with the incorporation of a small addition of sodium hydroxide/sodium silicate
(Elsevier Sci Ltd, 2023) Yardımcı, Mert Yücel; Ren, Qiang; Aydin, Serdar; Yardimci, Mert Yucel; De Schutter, Geert; İnşaat Mühendisliği / Civil Engineering
This paper investigates the possibility of accelerating the slowly progressive early reaction process of sodium carbonate-activated slag mixtures by adding a small amount of sodium hydroxide or sodium silicate to the so-dium carbonate activator. The reaction process of sodium carbonate-activated slag mixtures was evaluated by isothermal calorimetry and ultrasonic wave technology. Test results showed that adding a small amount of so-dium hydroxide or sodium silicate to the sodium carbonate activator significantly accelerated the reaction process, resulting in shortened setting times and enhanced mechanical properties. Only 1% Na2O contribution from sodium hydroxide addition can lead to a 2-d compressive strength of 20 MPa for sodium carbonate -activated slag mixtures. In addition, the 28 days compressive strength was significantly higher than the sole sodium carbonate activator. The addition of sodium hydroxide or sodium silicate also considerably influenced the rheological behavior of the sodium carbonate-activated slag mixture, enhancing the structural build-up rate and transforming the shear-thinning behavior to Bingham or shear-thickening behavior. A more well-packed microstructure was observed in the mixtures with the addition of sodium hydroxide; however, more micro -cracks were observed in the mixtures with a small incorporation of sodium silicate.
Citation Count: 0
Accreditation
(Artech House, 2017) Sevgi, Levent
[No Abstract Available]
Citation Count: 2
Accreditation: Crucial in World Trade, Public Safety, and Human Rights
(Ieee-inst Electrical Electronics Engineers inc, 2014) Sevgi, Levent
Accreditation is discussed. World-wide accreditation institutes are reviewed. Conformity Europe (CE) marking, procedures, and standards for accreditation, certification, and calibration are summarized through electromagnetic compatibility (EMC) tests and measurements. Error, uncertainty, and statistical evaluations and proficiency tests with typical results are presented.
Citation Count: 11
Accuracy of Digital Impressions Obtained Using Six Intraoral Scanners in Partially Edentulous Dentitions and the Effect of Scanning Sequence
(Quintessence Publishing Co inc, 2021) Diker, Burcu; Tak, Onjen
Purpose: To compare the accuracy of six intraoral scanners in two different partially edentulous maxillary models and to evaluate the effect of scanning sequence on accuracy. Materials and Methods: Maxillary Kennedy Class I and Class IV situations were used as reference models. The reference datasets were obtained by scanning the models using a highly accurate industrial scanner (ATOS Core 80, GOM). The following six intraoral scanners were evaluated: Trios 3 (3Shape), iTero Element 2 (Align Technology), Emerald (Planmeca), CEREC Omnicam (Dentsply Sirona), CEREC Primescan (Dentsply Sirona), and Virtuo Vivo (Dental Wings). A total of 120 scans from both models were obtained using the six intraoral scanners and divided into two groups based on scanning sequence. Accuracy was evaluated by deviation analysis using 3D image processing software (Geomagic Studio 12, 3D Systems). Kruskal Wallis and Mann-Whitney U tests were performed (P <= .05) for statistical analysis. Results: There were significant differences in the accuracy of digital impressions among intraoral scanners and scanning sequences. The trueness of the Trios scanner and the precision of the Trios, Primescan, and iTero scanners were significantly higher than for the other scanners. The Emerald had the lowest accuracy among the six intraoral scanners tested. Accuracy was affected by scanning sequence when using the Virtuo Vivo, Emerald, Primescan, and iTero. Conclusion: In Kennedy Class I and Class IV partially edentulous cases, it is useful to consider that the intraoral scanner used may affect the accuracy of the digital impression.
Citation Count: 21
Accuracy of six intraoral scanners for scanning complete-arch and 4-unit fixed partial dentures: An in vitro study
(Mosby-elsevier, 2022) Diker, Burcu; Tak, Onjen
Statement of problem. The digital scan accuracy of different intraoral scanners (IOSs) for long-span fixed prosthesis and the effect of the starting quadrant on accuracy is unclear. Purpose. The purpose of this in vitro study was to evaluate the accuracy of 6 IOSs for complete-arch and prepared teeth digitally isolated from the complete-arch and to determine the effect of the starting quadrant on accuracy. Material and methods. A maxillary model containing bilaterally prepared canines, first molar teeth, and edentulous spans between the prepared teeth was used. The model was scanned by using a highly accurate industrial scanner to create a digital reference data set. Six IOSs were evaluated: TRIOS, iTero, Planmeca Emerald, Cerec Omnicam, Primescan, and Virtuo Vivo. The model was scanned 10 times with each IOS by 1 operator according to the protocols described by the manufacturers. Five scans were made starting from the right quadrant (ScanR), followed by 5 scans starting from the left quadrant (ScanL). All data sets were obtained in standard tessellation language (STL) file format and were used to evaluate accuracy (trueness and precision) with a 3D analyzing software program (Geomagic Studio 12; 3D Systems) by using a best-fit alignment. The prepared teeth were digitally isolated from the complete-arch and evaluated with the analyzing software program. The Kruskal-Wallis and Mann-Whitney U statistical tests were used to detect differences for trueness and precision (alpha=.05). Results. Statistically significant differences were found regarding IOSs (P<.003) and scanning sequence (P<.05). The TRIOS showed the best trueness for the complete-arch, but not statistically different from Primescan, Virtuo Vivo, and iTero (P>.003). The lowest median values for precision of the complete-arch were also found using TRIOS, but no significant difference was found among the scanners (P>.003). In terms of trueness and precision, Primescan had the best accuracy for preparations. Emerald showed significant differences depending on the scanning sequence for complete-arch accuracy. ScanR for trueness (P=.021) and ScanL for precision (P=.004) showed improved results. However, Emerald, TRIOS, and Virtuo Vivo showed statistically significant differences in precision of preparations depending on scanning sequence. ScanL deviated less than ScanR when scanned with TRIOS (P=.025) and Emerald (P=.004), and the opposite with Virtuo Vivo (P=.008). In terms of preparations trueness, no significant difference was found between the ScanR and ScanL of any IOS (P>.05). Conclusions. Based on this in vitro study, the accuracy of the complete-arch and prepared teeth differed according to the IOS and scanning sequence.
Citation Count: 6
The Acute Effects of Different Intensity Whole-Body Vibration Exposure on Muscle Tone and Strength of the Lower Legs, and Hamstring Flexibility: A Pilot Study
(Human Kinetics Publ inc, 2021) Atıcı, Emine; Atici, Emine; Rezaei, Derya Azim; Ozturk, Ozgul; Uslu, Burcu; Ozcan, Burcu Ates; Okudan, Begum; Fizyoterapi ve Rehabilitasyon / Physiotherapy and Rehabilitation
Context: The research on the change in properties of the lower leg muscles by different intensity sinusoidal vertical whole-body vibration (SV-WBV) exposures has not yet been investigated. Objective: The purpose of this study was to determine effect of a 20-minute different intensity SV-WBV application to the ankle plantar flexor and dorsiflexor muscles properties and hamstring flexibility. Design: Prospective preintervention-postintervention design. Setting: Physiotherapy department. Participants: A total of 50 recreationally active college-aged individuals with no history of a lower leg injury volunteered. Interventions: The SV-WBV was applied throughout the session with an amplitude of 2 to 4 mm and a frequency of 25 Hz in moderate-intensity vibration group and 40 Hz in a vigorous-intensity vibration group. Main Outcome Measures: The gastrocnemius and tibialis anterior muscle tone was assessed with MyotonPRO, and the strength evaluation was made on the same lower kg muscles using hand-held dynamometer. The sit and reach test was used for the lower leg flexibility evaluation. Results: The gastrocnemius muscle tone decreased on the right side (d = 0.643, P = .01) and increased on the left (d = 0.593, P = .04) when vigorous-intensity vibration was applied. Bilateral gastrocnemius muscle strength did not change in both groups (P> .05). Without differences between groups, bilateral tibialis anterior muscle strength increased in both groups (P < .01). Bilateral gastrocnemius and tibialis anterior muscle tone did not change in the moderate-intensity vibration group (P> .05). Flexibility increased in both groups (P < .01); however, there was no statistically significant difference between the groups (d = 0.169, P = .55). Conclusions: According to study results, if SV-WBV is to be used in hamstring flexibility or ankle dorsiflexor muscle strengthening, both vibration exposures should be preferred. Different vibration programs could be proposed to increase ankle plantar flexor muscle strength in the acute results. Vigorous-intensity vibration exposure is effective in altering ankle plantar flexor muscle tone, but it is important to be aware of the differences between the lower legs.

Browse

Browsing WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection by Access Right "info:eu-repo/semantics/closedAccess"