Browsing by Author "Alizad, A."

Now showing 1 - 2 of 2

Citation Count: 0
Epoxy/phenolic nanocomposite based adhesives: Non-isothermal cure kinetic study
(Elsevier, 2024) Deriszadeh, Abbas; Shahraki, Farhad; Mostafa, Loghman; Ali, Ali B. M.; Mohebbi-Kalhori, Davod; Salahshour, Soheil; Alizad, A.
The curing behavior of an epoxy/phenolic-based system containing graphene oxide (GO), and rubber powder as a toughening agent has been studied using differential scanning calorimetry (DSC) under non-isothermal conditions at a temperature from 0 to 200 degrees C. So, to better dispersion of GO nanoplates in the resin media, the surface of the GOs was modified by 1,12-diaminododecane and subsequently aforementioned reaction was confirmed by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric techniques (TGA). DSC results show that rubber powders despite toughening properties prohibited resin-curing reactions. On the other hand, modified GO led to the promotion of curing reactions. The results of differential and integral isoconversional approaches indicated low activation energy for nanocomposite containing modified GO. Furthermore, thermal stability results reveal that the maximum decomposition temperature and char yield values of samples were increased gradually by the addition of GO and rubber powder to the system.
Citation Count: 0
A molecular dynamics study of the external heat flux effect on the atomic and thermal behavior of the silica aerogel/ paraffin /CuO nanostructure
(Pergamon-elsevier Science Ltd, 2024) Ren, Jiaxuan; Salahshour, Soheıl; Al-Bahrani, Mohammed; Jasim, Dheyaa J.; Al-Rubaye, Amir H.; Salahshour, Soheil; Alizad, A.
Investigating the nanostructure's atomic and thermal properties (TP) might help enhance energy conversion and storage technologies. This is particularly important when considering phase change materials (PCM) and their use in thermal energy storage systems. However, understanding the behavior of nanostructure's atomic and thermal components in response to temperature (Temp) changes is critical, as is improving its heat transfer capacities for a wide range of applications by examining the effect of external heat flux (EHF). As a result, the major goal of this research was to determine the effect of EHF on the atomic and TP of silica aerogel (SA)/ paraffin/CuO nanostructures. This investigation was done using molecular dynamics (MD) simulation and LAMMPS software. To achieve this, a study was undertaken into the effect of EHF of different magnitudes (0.01, 0.02, 0.03, and 0.05 W/m2) on the maximum (Max) density (Dens), velocity (Vel), and Temp, as well as HF, thermal conductivity (TC), and charging and discharging time. The results show that when the EHF increased to 0.05 W/m2, the Max Dens value decreased to 0.0754 atoms per square centimeter. Furthermore, the Max Temp and Vel increased to 1018.82 K and 0.0139/fs, respectively. Increased external heat discharge improved the thermal effectiveness of simulated construction. Increasing the EHF raised the TC and HF to 95.93 W/m2 and 1.93 W/mK, respectively. Finally, the results of this simulation are expected to improve understanding of nanostructure TP and their potential applications in improved energy conversion and storage technologies.